Installation of the Brother 2380 printer on Mac is quite easy, as per the correct procedure. This guide will cover the different methods for connecting the printer to the Mac, installing drivers, and troubleshooting common problems. Depending on whether you want a USB or wireless setup, use either of the methods below.
Step 1: Check Printer & Mac Compatibility
Confirm compatibility; make sure that the Mac is compatible with the Brother 2380 printer before proceeding with the setup. The printer must be powered on to establish a connection. When in doubt, simply perform a search on the Internet for ‘Brother printer repair near me,’ and that should pull up worthy assistance in case of any hardware problems.
Step 2: Connect Brother 2380 Printer to Mac
You can connect your Brother 2380 printer to a Mac using either a USB or wireless connection. Pick whichever one you prefer.
Method 1: USB Connection
- Start the machine –Plug the Brother 2380 into power and switch it on.
- USB connection – Use a USB cable to connect the printer to the Mac.
- System Preferences – Go to your Mac and click on the Apple menu, followed by System Preferences.
- Printers and Scanners – Locate and click on ‘Printers and Scanners.’
- Click the ‘+’ Sign – The available printers will be listed. Click on ‘Add’ to add a new one.
- Select Brother 2380 Printer – Choose the printer from the list and click the ‘Add’ button.
- Install Drivers if Required – If the system prompts you for drivers, go ahead and follow the steps to install.
Method 2: Wireless Connection
If you want your Brother 2380 printer to connect to Mac free of any cable, follow these steps:
Enable Wi-Fi from the Printer: The Wi-Fi button on the printer needs to be pressed to enter a setup mode.
- Connect to the Same Wi-Fi – Mac and the printer should be operating on the same Wi-Fi.
- Go to System Preferences – Click on the Apple menu and choose “System Preferences”.
- Select Printers & Scanners – Click on “Printers & Scanners” and hit the ‘+’ button.
- Select Brother 2380 Printer – The printer should appear in the list. Click on it and hit Add.
- Install the Brother Drivers – If prompted, follow the on-screen instructions to download and install the latest drivers.
Step 3: Tester for the Printer
After the Brother 2380 printer has been added to the Mac, it should be tested for its functionality:
- Open any document/image.
- Then go to the File menu and choose Print.
- Select the Brother 2380 printer from among the listed printers.
- Click Print to see if it works properly.
Troubleshooting
There can be some occasional hiccups in functioning the Brother 2380 printer on a Mac; here are some quick fixes:
Printer Not Found
- Make sure that the printer has power.
- Check the USB or Wi-Fi connectivity.
- Reboot your Mac and printer.
Printer Offline
When your printer shows as offline, once again remove it from Printers & Scanners and add it anew.
Verify the strength of your Wi-Fi signal.
Update printer firmware from the Brother website.
Print jobs are stuck
Open System Preferences– Printers and Scanners.
Click on Open Print Queue under your Brother 2380 Printer.
Try removing the stuck print job and reprint.
Conclusion
It’s so easy to add the Brother 2380 printer to your Mac as long as the right steps are followed. Whether it’s through USB cable or Wi-Fi, the process would run so quickly and smoothly. For issues using the printer, try checking out the troubleshooting tips above; now you can enjoy stress-free printing with your Brother 2380 printer on your Mac! If the printer still refuses to cooperate, a search for Brother printer repair near me would bring up expert assistance.